Log inLog in    RegisterRegister       SearchSearch    ProfileProfile    ContactContact    FAQFAQ    Log in to check your private messagesLog in to check your private messages

Jammed Landing Gear Lever in 737-300

 
Post new topic   Reply to topic    www.TheAirlinePilots.com Forum Index -> Boeing 737
View previous topic :: View next topic  
Author Message
K.Haroon
Site Admin


Joined: 11 Dec 2005
Posts: 1305

PostPosted: Sun Mar 02, 2008 11:17 am    Post subject: Jammed Landing Gear Lever in 737-300 Reply with quote

The "Landing Gear Lever Jammed in The UP Position" checklist assumes that the landing gear transfer valve has failed in the UP or pressurized position. Manual gear extension will not function. In order to extend the gear, the corresponding hydraulic system must be depressurized to allow the uplocks to be released. The checklist may require 10-15 minutes to complete because hydraulic system pressure must be bled off as each gear is extended. If sufficient fuel is not available to allow the completion of the checklist, a gear up or partial gear landing is preferable to running out of fuel while attempting to solve a gear problem. This checklist should not be performed if one or more gear is extended.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.TheAirlinePilots.com Forum Index -> Boeing 737 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB